Local 2026 Pricing · Kingman, AZ

Kingman, AZ Well Drilling Cost

Avg. Depth

300 ft

Cost / Foot

$30–$68

Total Project

$13,200

vs. National Avg

76% above avg.

the $7,500 national avg.

Kingman, AZ Well Drilling Cost by Depth

Well Depth Drilling Only Complete System Est. Total
100 ft $3,000–$6,800 $7,800–$11,600 $9,200
150 ft $4,500–$10,200 $9,700–$15,400 $11,800
200 ft $6,000–$13,600 $11,600–$19,200 $14,400
300 ft $9,000–$20,400 $15,400–$26,800 $19,600
400 ft $12,000–$27,200 $19,200–$34,400 $24,800
500 ft $15,000–$34,000 $23,000–$42,000 $30,000

*Costs are estimates based on Kingman area rates for 2026. Complete system includes casing, pump, pressure tank, electrical, and permits. Actual prices vary by property.

Well Drilling in Kingman, AZ

Basin and Range alluvial fill in the Hualapai Valley; sand, gravel, and clay sequences from erosion of surrounding mountain ranges

The average residential well in Kingman is 300 feet deep and costs approximately $13,200 for a complete system including drilling, casing, pump, and pressure tank. Drilling rates in the area range from $30 to $68 per foot, which is 76% above the national average of $7,500.

The primary aquifer serving the Kingman area is the Hualapai Valley Basin Aquifer. Well depths can vary significantly depending on your specific property location and proximity to the aquifer.

Permits & Regulations

Mohave County; ADWR registration required; $150; no AMA restrictions

See our full Arizona well drilling cost guide for permit requirements and water quality details

Get Free Well Drilling Quotes in Kingman

Compare prices from licensed AZ well drillers near you.

Well Drillers in Kingman, AZ

We're expanding our directory of licensed well drillers in Kingman. Get matched with local pros instantly by requesting free quotes below.

Kingman Well Drilling FAQ

How much does it cost to drill a well in Kingman, AZ?
The average cost to drill a residential water well in Kingman is $13,200, based on a typical depth of 300 feet. Drilling rates in the Kingman area range from $30 to $68 per foot. Total project cost includes drilling, casing, pump installation, pressure tank, electrical hookup, and water testing.
How deep are wells in Kingman?
The average residential well depth in Kingman is 300 feet. Actual depth depends on your specific property location, elevation, and proximity to the Hualapai Valley Basin Aquifer. A local well driller can estimate the depth needed for your property based on nearby well logs and geological data.
Do I need a permit to drill a well near Kingman?
Mohave County; ADWR registration required; $150; no AMA restrictions For detailed Arizona permit requirements, licensing rules, and water rights information, see our full Arizona well drilling cost guide.
How long does it take to drill a well in Kingman?
Most residential wells in the Kingman area take 1–3 days to drill, depending on depth and local geology. The complete project — including pump installation, electrical hookup, water testing, and permitting — typically takes 1–2 weeks from start to finish. Scheduling availability with local drillers may add additional lead time.

Nearby Areas

Also serving: Golden Valley, Bullhead City, Lake Havasu City, Dolan Springs, Hackberry

Get Free Quotes in Kingman

Compare up to 3 competitive quotes from licensed well drillers in the Kingman, AZ area. Free, no-obligation estimates.

  • Licensed & insured AZ well drillers
  • Matched to your area & property
  • Compare prices before you commit

Get Free Well Drilling Quotes in Kingman

100% free · No obligation · Licensed & insured pros

Your information is secure and never shared with third parties

Ready to Get Started?

Get matched with top Kingman well drillers today.