Local 2026 Pricing · Austin, TX

Austin, TX Well Drilling Cost

Avg. Depth

250 ft

Cost / Foot

$26–$60

Total Project

$10,000

vs. National Avg

33% above avg.

the $7,500 national avg.

Austin, TX Well Drilling Cost by Depth

Well Depth Drilling Only Complete System Est. Total
100 ft $2,600–$6,000 $7,400–$10,800 $8,800
150 ft $3,900–$9,000 $9,100–$14,200 $11,200
200 ft $5,200–$12,000 $10,800–$17,600 $13,600
300 ft $7,800–$18,000 $14,200–$24,400 $18,400
400 ft $10,400–$24,000 $17,600–$31,200 $23,200
500 ft $13,000–$30,000 $21,000–$38,000 $28,000

*Costs are estimates based on Austin area rates for 2026. Complete system includes casing, pump, pressure tank, electrical, and permits. Actual prices vary by property.

Well Drilling in Austin, TX

Travis County Balcones Fault Zone; Edwards Aquifer recharge zone on west side; eastern areas on Blackland Prairie with different geology

The average residential well in Austin is 250 feet deep and costs approximately $10,000 for a complete system including drilling, casing, pump, and pressure tank. Drilling rates in the area range from $26 to $60 per foot, which is 33% above the national average of $7,500.

The primary aquifer serving the Austin area is the Edwards Aquifer / Balcones Fault Zone. Well depths can vary significantly depending on your specific property location and proximity to the aquifer.

Permits & Regulations

Travis County; Barton Springs-Edwards Aquifer CD; $200-$400; Barton Springs protection regulations affect many wells

See our full Texas well drilling cost guide for permit requirements and water quality details

Get Free Well Drilling Quotes in Austin

Compare prices from licensed TX well drillers near you.

Well Drillers in Austin, TX

We're expanding our directory of licensed well drillers in Austin. Get matched with local pros instantly by requesting free quotes below.

Austin Well Drilling FAQ

How much does it cost to drill a well in Austin, TX?
The average cost to drill a residential water well in Austin is $10,000, based on a typical depth of 250 feet. Drilling rates in the Austin area range from $26 to $60 per foot. Total project cost includes drilling, casing, pump installation, pressure tank, electrical hookup, and water testing.
How deep are wells in Austin?
The average residential well depth in Austin is 250 feet. Actual depth depends on your specific property location, elevation, and proximity to the Edwards Aquifer / Balcones Fault Zone. A local well driller can estimate the depth needed for your property based on nearby well logs and geological data.
Do I need a permit to drill a well near Austin?
Travis County; Barton Springs-Edwards Aquifer CD; $200-$400; Barton Springs protection regulations affect many wells For detailed Texas permit requirements, licensing rules, and water rights information, see our full Texas well drilling cost guide.
How long does it take to drill a well in Austin?
Most residential wells in the Austin area take 1–3 days to drill, depending on depth and local geology. The complete project — including pump installation, electrical hookup, water testing, and permitting — typically takes 1–2 weeks from start to finish. Scheduling availability with local drillers may add additional lead time.

Nearby Areas

Also serving: Bee Cave, Lakeway, Dripping Springs , Pflugerville , Cedar Park

Get Free Quotes in Austin

Compare up to 3 competitive quotes from licensed well drillers in the Austin, TX area. Free, no-obligation estimates.

  • Licensed & insured TX well drillers
  • Matched to your area & property
  • Compare prices before you commit

Get Free Well Drilling Quotes in Austin

100% free · No obligation · Licensed & insured pros

Your information is secure and never shared with third parties

Ready to Get Started?

Get matched with top Austin well drillers today.